SUMMERS®
FIELD TESTED TOUGH!

Truck
Mounted

    SUPERSPRAYERS  
with WET BOOM   

This big sprayer features a wet boom for fast and accurate coverage of large acreages.  Ten application widths are available from 60 - 90 ft. in 3 ft. 4 in. increments.  Windshields are available on sizes from 60 - 80 ft.  The 350 and 500 gallon (U.S.) polypropylene tank, with a ten inch fillwell, is positioned, along with the boom, directly behind the cab for better weight distribution.  The low profile tank provides the operator with excellent boom visibility.
The tank tapers fore, aft and sideways to a three inch sump at the bottom center to provide nearly complete drainage.  The smooth, curved bottom allows for thorough chemical mixing.

Assembled, with all corrosion resistant components, this sprayer utilizes two electric ball valves for boom control; one to control the left and center sections, and one to control the right section.  An optional third ball valve permits individual control of each section.  Included in the system is a 100 mesh nozzle main line strainer an agitation system with a separate ball valve for adjustable agitation.  Standard equipment includes your choice of a manual 205 or computerized 405 controller.  The pump is coupled directly to a 5.5 or 8 H.P. Honda engine.  A larger engine is optional.

Other options include:  Mix and Fill, Bottom Fill Kit, Clean Water Tank, Bottom Line Strainer and Foam Marker with Platform.
Booms are equipped with Quickjet 3-Head Pinwheel nozzles spaced on 20".  Quickjet nozzles are self aligning and can be used with 80 or 100 degree flat fan spray tips for desired application rate.  Changing of spray tips is quickly done b simply rotating Pinwheel. Optional Manual Boom End Nozzles may be added for additional coverage.  Electric Boom End Nozzles allow in-cab control of perimeter spraying.. Spray booms fold along sides for compact transport.

Spray tank is tapered from all directions to a bottom sump to provide nearly compete emptying and easier cleanup. The Tip Lift allows the operator to lift the boom to conform to ground slopes.  The electro-hydraulic lift is activated from the truck cab and will raise the 90 ft. boom tip 9' 9" from horizontal in 5 seconds.

Booms are equipped with ductile cast break-aways to reduce damage when contacting an obstruction.  Gravity returns them to spraying position.  Booms are hydraulically dampened and equipped with spring returns.  The Summers sturdy, truss-type Flex-Action Boom is designed to swing rather than bounce over rough terrain.  This self-leveling system is essential with long booms in order to maintain a constant ground-to-nozzle distance.  The booms are independently adjustable for height.   The spray system is controlled from the cab by a swing-away electronic monitor/control unit.



Compact, 5.5 or 8 HP engine and centrifugal pump assembly along with 1" regulator and electric ball valves are located for easy access. A larger engine and electric start are available.


Optional Clean Water Tank is located for convenience and includes rubber gloves and goggles for safe sprayer servicing.		 The Aluminum Wet Boom with 1" ID keeps pressure losses low to enable application rates up to 20 gal. (U.S.) per acre.  Ten boom sizes from 60' to 90' are available with two different nozzle spacing increments.  Optional Windshields are available for all models.