|
|
SUMMERS® |
|
|
SUMMERS® |
SUPERHARROW PLUS |
|
| More Versatile
Performance ... featuring longer teeth (26") to provide the versatility for working anything from tough soils to spreading heavy residue! More Aggressive Action ... The Summers Superharrow Plus is a harrow unlike any other harrow ever designed. The 9/16" tooth, made of high quality oil tempered wire, is unsurpassed for Minimum-Till and No-Till residue management operations. Plus, it can also be used for seedbed preparation, light tillage, granular incorporation, and to spread and break up residue after the combine. Plus: The large diameter 9/16" tooth ensures the needed working pressure at the tooth end and flexibility for residue clearance. The larger diameter makes the tooth more aggressive, a feature lost on 1/2" teeth extending over 20". |
 Plus: The 5-bar, 6' sections provide more flexibility and follow ground contours better. Bars are spaced 16" apart with the tines spaced 2.4". Plus: The extra-ordinary heavy tooth is designed to provide absolute residue control. Each harrow section is given proper support by two heavy duty lift arms. The Summers' Exclusive top mounted torsion bar pressure springs provide a streamlined design for optimum residue clearance. |
|
 |
 |
|
| Optional Hydraulic Tooth Angle Adjustment permits changing tooth angle to conform to a variety of field conditions or when using the Superharrow Plus for different operations. |
| Plus:
Spring loaded locks provide for easy tooth
angle adjustment, from vertical to a 45° angle, with spring-loaded
convenience.Plus:
the tooth angle of the front bar can be adjusted independently of the
other four. This permits the front bar to work more aggressively
while allowing the rest of the section to clear more residue.Adjusting the tooth angle affects the height at which the section should be set.
The Superharrow Plus has on-the-go hydraulic depth
adjustment to raise and lower the entire drawbar as needed. No
cranks or other time consuming adjustments are required. Plus: Additional manual adjustment settings are provided on the lift arms to compensate for tooth wear. |
 Plus: Special standard back-up feature allows operator to back up with machine in field position in order to reach isolated areas and tight corners. The drawbar is also controlled in hilly terrain. |
 Plus: A Heavy-duty Ductile Cast Knuckle permits maximum wing flex for ground contours and also allows the Superharrow Plus to fold easily for transport. Plus: Available in sizes to fit your needs: Working widths of 36, 48, 60, 72, and 84 ft. |
 Plus: The drawbar is a massive 8 x 8 in. square tube for maximum strength with 11L tires (optional 31 x 13.5 on hitch) for proper support. The streamlined wing height adjustment design allows teeth to cover wheel tracks. |
 |
Plus: Hydraulic Depth Adjustment on the cart and wing wheels is standard equipment so you can change penetration depth and down pressure as you encounter different soil conditions. |
|
Plus: The hydraulically activated cable Auto-Fold is standard equipment on an impressive 22' hitch with oscillating tandem axles. This positive lock Auto-Fold system allows dumping on-the-go. When taking a tight corner and the inside wing is unable to back up, our proven, simple, Auto-Fold system allows slack in the cable. This is not possible with solid beam folding systems where damage can occur. |
| Plus: Maintenance costs are reduced since cables are practically unbreakable and not likely to be damaged by less than careful backing when unfolding the machine. |
|
|
Standard lighting for safe transport on roads. |
Folded compactly for safe transport. |
|
SPECIFICATIONS |
| Sizes |
36' |
48' |
60' |
72' |
84' |
| Machine Weight w/Hyd. Depth Adj.* | 8,860# | 10,260# | 11,680# | 13.100# | 15,000# |
| Machine Weight w/Hinged Wing * | DNA | DNA | 10,700# | 12,360# | 14,020# |
| Center Section Width | 12' | 12' | 12' | 12' | 12' |
| Split Hinged Wing | No | No | Optional | Optional | Optional |
| Number of Pull Cables | 2 | 2 | 2 (4 Hw) | 4 | 4 |
| Number of 6 ft. Harrow Sections | 6 | 8 | 10 | 12 | 14 |
| Hitch Length | 22' | 22' | 22' | 22' | 22' |
| Hitch Construction |
Tubing 4" x 8" |
Tubing 4" x 8" |
Tubing 4" x 8" |
Tubing 4" x 8" |
Tubing 4" x 8" |
| Hitch Tires | 4-llL (31 x 13.5 Opt) |
4-11L (31 x 13.5 Opt) |
4-11L (31 x 13.5 Opt) |
4-11L (31 x 13.5 Opt) |
4-11L (31 x 13.5 Opt) |
| Hitch Wall Thickness | 1/4" | 1/4" | 1/4" | 1/4" | 1/4" |
| Drawbar Dimensions | 8" x 8" | 8" x 8" | 8" x 8" | 8" x 8" | 8" x 8" |
| Drawbar Wall Thickness | 1/4" | 1/4" | 1/4" | 1/4" |
5/16" / 1/4" (HW) |
| Support Tires | 2-11L | 2-11L | 2-11L 4-11L (HW) |
2-11L 4-11L (HW) |
2-11L 4-11L (HW) |
|
Transport Tire LT265/75R16E |
2 | 2 | 2 | 2 | 2 |
|
Hitch Wheel Tread (w/31 x 13.5 Tire Opt) |
46"/101" (47"/103") |
46"/101" (47"/103") |
46"/101" (47"/103") |
46"/101" (47"/103") |
46"/101" (47"/103") |
| Transport Width | 13'-2" | 13'-2" |
13'-2" 14'-2" (HW) |
13'-2" 14'-2" (HW) |
13'-2" 14'-2" (HW) |
| Dual Cylinder Size | 4" x 32" | 4" x 32" | 4" x 32" | 4" x 32" | 4" x 32" |
| Engine Horsepower Required ** | 110-176 | 147-235 | 184-294 | 220-353 | 257-412 |
|
* Weight includes standard wheels with
tires. ** Engine Horsepower Required will vary depending upon soil conditions, tillage depth and operating speed. |
|||||
