Model 104 & 106 Mounted Harrows

Designed for tough soil conditions and high residue areas, the Model 104 and Model 106 Mounted Harrows are available in widths of 6, 8, and 10 ft. The tine mounting bars are 2-3/8 inches in diameter and are spaced on 14-1/2 inch centers.

The Model 104 is equipped with 1/2 x 20 inch "free-floating" teeth with conical coils and 1/2 inch stop bolts. The effective tine spacing of 4 inches on 3 bar, or 3 inches on 4 bar provides excellent residue clearance.

The Model 106 is equipped with 9/16 x 26 inch "free-floating" teeth with conical coils and 1/2 inch stop bolts. The effective tine spacing is 4 inches on 3 bar, or 3 inches on 4 bar.

Tine angle is easily adjusted on both models with a spring loaded lock assembly.

The standard mounting bracket for the Models 104 and 106 fits frames sizes from 2-1/2 to 6 inches. Universal disk brackets are available as are high clearance brackets for high frame disks.
(Double mounting arms are required on 6 ft. units for wing applications.)

Harrow Features:

Tooth angle is easily adjusted with a rear mounted lever and spring loaded lock assembly shown above.

Optional Brackets for mounting a second arm on right and left sides of sections where required due to frame obstructions.

Optional Universal High Clearance Brackets permit harrow mountings on disks.

WEIGHTS (Lbs.)

Model	Width	3-Bar Section	4-Bar Section	3-Bar Total	4-Bar Total
104	6'	193	290	363*	460*
104	8'	264	358	434*	528*
104	10'	318	426	488*	596*

106	6'	233	322	403*	492*
106	8'	296	401	466*	571*
106	10'	358	479	528*	649*